MODEL 305
|
OPERATING INSTRUCTIONS
|
 |
INTRODUCTION
This instrument is a portable 3½ digit, compact-sized
digital thermometer designed to use external K-type thermocouple as
temperature sensor. Tmeprature indication follows National Bureau of
Standards and IEC temperature/voltage tables for K-type thermocouples.
One K-type thermocouple is supplied with the thermometer.
GENERAL
Display:
3½ digit liquid crystal display (LCD) width maixum reading
of 1999.
Battery
Standard 9V battery (NEDA 1604, IEC 6F22)
Battery life
200 hours typical with carbon zinc battery
Dimensions:
147 mm (H) x 70 mm (W) x 39 mm (D)
Weight: 7.4 oz (210g)
Supplied Probe:
4-foot type "K" thermocouple bead probe (teflon tape insulated).
Maximum insulation temperature 260°C (500°F). Probe accuracy ±2.2°C
or ±0.75% of reading (whichever is greater) from 0° to 800°C.
|
SPECIFICATIONS ELECTRICAL
Temperature Scale:
Celsius or Fahrenheit user-selectable
Measurement Range:
-50°C to 1300°C (-58°F to 2000°F)
Resolution: 1°C or 1°F, 0.1°C or 0.1°F
Accuracy:
Accuracy is specified for operating temperatures over the range of
18°C to 28°C (64°F to 82°F), for 1 year, not including thermocouple
error.
±(0.3% rdg + 1°C) - 50°C to 1000°C
±(0.5% rdg + 1°C) 1000°C to 1300°C
±(0.3% rdg + 2°F) - 58°F to 2000°F
Temperature Coefficient
0.1 times the applicable accuracy specification per °C from 0°C
to 18°C and 28°C to 50°C (32°F to 64°F and 82°F to 122°F).
Input Protection:
60V dc or 24 V rms ac maximum input voltage on any combination of
input pins.
Reading Rate: 2.5 times per second.
Input Connector:
Accepts standard miniature thermocoupel connector's (flat blades
spaced 7.9 mm, center to center).
|
ENVIRONMENTAL
Ambient Operating Range:
0°C to 50°C (32°F to 122°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Relative Humidity
0% to 80% (0°C to 35°C)(32°F to 95°F)
0% to 70% (35°C to 50°C)(95°F to 122°F)
|
MODEL GMH 3230
|
|
 |
| Temperaturdrift | 0,01%/K |
| Vergieichssteiie | ±0,3°C |
| Nenntemperatur | 25°C |
| Arbeitstemperatur | 0 bis +50°C |
| Relative Feuchte | 0 bis 95%r.F. (nicht betauend) |
| Lagertemperatur | -20 bis +70°C |
| Gehäuseabmessungen | 142 x 71 x 26 mm (L x B x D)
Gehäuse aus schiagfestem ABS. Folientastatur, Klarsichtscheibe. Frontseitig 1P65, integrierter Aufstell-Aufhängebügel |
| Gewicht | ca. 155 g |
| Fühleranschiüsse | 2 Anschlußbuchsen für Miniatur-Flachstecker(bei Typ K thermospannungsfrei |
| Schnittstelle | serielle Schnittstelle (3.5 mm Klinkenbuchse), über galv. Getrennten
Schnittstellenwandler GRS3100 (siehe Zubehör) direkt an die R5232-Schnidstede eines PC anschließbar. |
| Stromversorgung | 9V-Batterie, Type IEC 6F22 (im Lieferumfang) sowie zusätzliche Netzgerätebuchse (1.9 mm innenstiftdurchmesser) für externe 10,5-12V Gieichspannungsversorgung. (passendesNetzgerät:GNG10/3000)
| Stromaufnahme | ca. 3 mA |
| Anzeige | 2 vierstellige LCD-Anzeigen (1 2.4 mm bzw. 7mm hoch) für Temperatur, bzw. für Min-,
Max- Wert, Holdfunktion etc. sowie weitre Hinweispfeile. |
| Bedienelemente | insgesamt 6 Folientaster für Ein-/Aus-Schalter. Auswahl der Thermoelemente, Min-
und Max- Wert-Speicher, Hold-Funktion, usw. |
| Min-/Max-Wertspeicher | Maximal und der Minimalwert werden jeweils für Fühler 1, Fühler 2 und Differenz
gespeichert. |
| Holdfunktion | Auf Tastendruck werden die aktuellen Werte von Fühler 1, Fühler 2 und Differenz
gespeichert. |
| Automatik-Off-Funktion | Gerät schaltet sich, wenn für die Dauer der Abschaltverzögerung keine Taste gedrückt,
bzw. keine Schnittstellenkommunikation vorgenommen wurde, automatisch ab. Die Abschalt verzögerung ist frei einstellbar zwischen 1-120 min oder ganz ausschaltbar. |
| EMV: | Das GMH 3230 entspricht den wesentlichen Schutzanforderungen, die in der Richtlinie des Rates zur Angleichung der Rechtsvorschriften der Mitgliedsstaaten über die elektromagnetische Verträglichkeit (891336/EWG) festgelegt sind. Zusätzlicher Fehler: <1 % |
| |
|
Technical Data |
| Thermoelemente | J. K. N. S. T | |
| Auflösung | 0,1°C bzw. 1°C | 0,1°F bzw. 1°F |
| Meßberelche | | |
| T y p K: (NiCr-Ni) | -199,9... +999.9°C bzw. -220...+1370°C | -199,9... +999,9°F bzw. -364...+2498°F |
| Typ J: (Fe-CuNi) | -120,0... +700,0°C bzw. -200... +1100°C | -184,0... +999,9°F bzw. -328... +2012°F |
| Typ N: (NiCrSi-NiSi) | -199,9... +999,9°C bzw. -200... +1300°C | -199.9... +999.9°F bzw. -328... +2372°F |
| Typ S: (Pt10Rh-Pt) | -50,0... +999,9°C bzw. -50... +1750°C | -58,0... +999,9°F bzw. -58... +3182°F |
| Typ T: (Cu-CuNi) | -120,0... +400.0°C bzw. -200...+400°C | -184.0...+752.0°F bzw. -328...+752°F |
| Genauigkeit | (fürThermoelemente nach DIN EN 60584) ±1Digit (bei Nenntemperatur) |
| Typ K: | -199,9...+999,9°C: | ±0,03%v.MW.±0,05%FS (T≥-60°C); | ±0,2%v.MW. ±0,05%FS (T<-60°C) |
| | -220... +1370°C: | ±0,08%v.MW.±0,1%FS (T≥-100°C); | ±1°C±0,1%FS (T<-100°C) |
| Typ J: | -120.0...+700,0'C: | ±0,03%v.MW.±0,08%FS (T≥-80°C); | ±0,2%v.MW.±0,08%FS (T<-80°C) |
| | -200 ... +1100°C: | ±0.03%v.MW.±O,1%FS (T≥-150°C); | ±1°C±0.1%FS (<-150°C) |
| Typ N: | -199,9...+999,9°C: | ±0,03%v.MW.±0,05%FS (T≥-60°C); | ±0,2%v.MW.±0.05%FS (T<-60°C) |
| | 200...+1300°C: | ±0,08%v.MW.±0,1%FS (T≥-100°C); | ±1°C±0,1%FS (T<-100°C) |
| Typ S: | 0,0... +999,9'C: | ±0,05%v.MW.±0,08%FS (T≥200°C); | ±1°C±0,08%FS (T<200°C) |
| | -50 ... +1750°C: | ±0,1%v.MW.±0,1%FS (T≥200°C); | ±1°C±0,1%FS (T<200°C) |
| TypT: | -120,0...+400,0°C: | ±0,03%v.MW.±0,1%FS (T≥-70°C); | ±0,2%v.MW.±0,1%FS (T<-70°C) |
| | -200... +400°C: | ±1°C (T≥-100°C); | ±1°C ±1Digit (T<-100°C) |